
Kanpeki Lab 58mm Calibrated Tamper
7.7Very good · out of 10$36.95 Price on Nov 17, 2026 · may have changed- Tamper
- 72 buyer reviews
- Espresso accessories

Product images: Amazon listings
The Kanpeki Lab 58mm Calibrated Tamper packs a 58 mm size made for Breville, spring-loaded, even tamping and a self-leveling base into one tamper. 72 buyers rate it 4.6/5, and it suits even, repeatable tamps.
| Brand | Kanpeki Lab |
|---|---|
| Category | Espresso accessories |
| Type | Tamper |
| Size | 58 mm |
| Material | 304 stainless steel |
| Buyer reviews | 72 · 4.6/5 |
| ASIN | B0FWXSQ3BG |
Full listing title: 58mm Espresso Tamper | Calibrated Self-Leveling Coffee Tamper with Audible Click, Spring-Loaded, 304SS Ripple Base & Walnut Handle | 58.35mm Precision Tamper for Standard 58mm Baskets | Kanpeki Lab
Two tampers close to it on our rating, each with a dated price.



The size the listing states, sold for Breville, Gaggia and Rancilio machines. Measure the inside of your basket at the rim first: a millimetre off and it won't sit right.
What it has going for it
32 lb spring. The spring sets the pressure at 32 lb, so every tamp feels the same whoever is holding it.
Self-leveling. A guide sits on the basket rim and keeps the tamp flat, which means less channeling.
The listing sizes it at 58 mm, for Breville, Gaggia and Rancilio machines.
Most E61 and commercial-style machines use 58 mm; many home machines use 51 to 54 mm, so check your manual or measure the basket at the rim.
The seller states, word for word, in the Kanpeki Lab 58mm Calibrated Tamper listing:
The spring loaded mechanism releases at precisely 32lb and gives one clear, audible click the moment you reach it, so every puck is pressed at the same force.
Self-Leveling 58mm tamper tool rests flush against the basket and stays level through the full press, correcting any tilt in your wrist before it reaches the puck.
Machined to a true 58.35mm diameter, this tamper sits close to the portafilter basket wall, leaving less room for grounds to escape around the edge during the press.
Ships with the 32lb spring installed, plus 20lb and 25lb springs in the box to go lighter for delicate roasts in seconds.
Wipe the base and spring clean and the click stays crisp over years of daily prep.
Those are the seller's words and figures. How the shot tastes in your kitchen is something no listing can tell you.

What the Kanpeki Lab 58mm Calibrated Tamper listing names:
Hold the size against your own basket or machine before you order.

On Nov 17, 2026, that price put it around the middle of the 11 tampers we have a recent price for.
The button opens the exact listing (ASIN B0FWXSQ3BG), where today's price, stock and seller apply.

Want it dishwasher-safe? The USEAMIE Coffee Tamper with Mat, 58mm (8.8/10) says dishwasher-safe in its listing.
Want to spend less? The Boicafe 58mm Espresso Tamper with Mat (8.5/10) was listed at $14.99 on Nov 17, 2026.
Our take
We like the Kanpeki Lab 58mm Calibrated Tamper for a 58 mm size made for Breville and spring-loaded, even tamping. Only 72 buyers have rated it so far (4.6/5), so treat the score as an early read. The catch with this Kanpeki Lab tamper: photos can't tell you how it sits in your own basket, so the size has to be right. We'd pick it if you own a Breville machine with a 58 mm portafilter; otherwise, put it next to the Feilair 54mm Spring-Loaded Tamper first.
Buyers give it 4.6/5, an excellent record, above our ranked picks' 4.4 average. 72 reviews is still a modest pile, so a handful of new ones can move it.
Before you order the Kanpeki Lab 58mm Calibrated Tamper and clear a spot for it, check the basket size: it is sized at 58 mm for Breville machines, and a millimetre off means it won't fit.
Measure the inside of your basket at the rim with a ruler or calipers, or look up your machine's portafilter size. Our basket and portafilter guide lists the common ones.
Coffee oil turns stale and bitter, so rinse it after the session and dry it before it goes back in the drawer.
How the Kanpeki Lab 58mm Calibrated Tamper stacks up against the closest alternative, the Feilair 54mm Spring-Loaded Tamper.
| Criterion | Kanpeki Lab 58mm Calibrated Tamper | Feilair 54mm Spring-Loaded Tamper |
|---|---|---|
| Our rating | 7.7/10 | 7.9/10 |
| Size | 58 mm | 54 mm |
| Made for | Breville and Gaggia | Breville |
| Material | 304 stainless steel | stainless steel |
| Spring | 32 lb | 30 lb |
| Buyer reviews | 72 · 4.6/5 | 194 · 4.6/5 |
Pick the Feilair 54mm Spring-Loaded Tamper if you want our higher-rated option (7.9/10).
We rate it 7.7/10 (very good). It is based on 72 buyer reviews averaging 4.6/5 and the specifications stated in the listing.
Its listing states a 58 mm fit for Breville and Gaggia machines, a calibrated 32 lb spring, a self-leveling base and a 304 stainless steel build. These are the seller's figures; how well it fits your machine is worth confirming first.
The fit: measure the inside of your basket at the rim with a ruler or calipers, or look up your machine's portafilter size. Our basket and portafilter guide lists the common ones. Care: coffee oil turns stale and bitter, so rinse it after the session and dry it before it goes back in the drawer.
We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.